VALVE TRIM MATERIALS

The trim of a valve is the set of replaceable parts of a valve. The trim shall be selected carefully, depending on process parameters as fluid, working temperature / pressure and valve type. The API 600 norm defined standard numbers to indentify the trim in terms of combinations of materials for the replaceable parts of the valve.

API 600 TRIM CHART

API TRIM # MATERIAL SEAT DISC BACKSEAT STEM
1 410 410 410 410 410
2 304 304 304 304 304
3 F310 310 310 310 310
4 Hard 410 Hard 410 410 410 410
5 Hardfaced Stellite Stellite 410 410
5A Hardfaced Ni-Cr Ni-Cr 410 410
6 410 and Cu-Ni Cu-Ni Cu-Ni 410 410
7 410 and Hard 410 Hard 410 Hard 410 410 410
8 410 and Hardfaced Stellite 410 410 410
8A 410 and Hardfaced Ni-Cr 410 410 410
9 Monel Monel Monel Monel Monel
10 316 316 316 316 316
11 Monel Stellite Monel Monel Monel
12 316 and Hardfaced Stellite 316 316 316
13 Alloy 20 Alloy 20 Alloy 20 Alloy 20 Alloy 20
14 Alloy 20 and Hardfaced Stellite Alloy 20 Alloy 20 Alloy 20
15 304 and Hardfaced Stellite Stellite 304 304
16 316 and Hardfaced Stellite Stellite 316 316
17 347 and Hardfaced Stellite Stellite 347 347
18 Alloy 20 and Hardfaced Stellite Stellite Alloy 20 Alloy 20

 

TRIM SELECTION 

TRIM RECOMMENDED SERVICE
13% Cr, Type 410 Stainless Steel For oil and oil vapors and general services with heat treated seats and wedges.
13% Cr, Type 410 plus Hardfacing Universal trim for general service requiring long service life up to 1100°F (593°C).*
Type 316 Stainless For liquids and gases which are corrosive to 410 Stainless Steel, up to 1000°F (537°C).*
Monel For corrosive service to 842°F (450°C) such as acids, alkalies, salt solutions, etc.
Alloy 20 For corrosive service such as hot acids -49°F to 608oF (-45°C to 320°C).
NACE Specially treated 316 or 410 trim combined optionally with B7M Bolts and 2HM nuts to meet NACE MR-01-75 requirements.
Full Stellite Full hard faced trim, suitable for abrasive & severe services up to 1200°F (650°C).*

* Depends upon base material grade

 

 

Looking for additional info? Contact the pipingonline expert team

Useful links: ANSI | ASME | ASTM | API | MSS | BS | DIN | ISO